Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada
Vancouver Hardwood Floors Sanding Refinishing Installation supply Gymnasium


 With a few simple steps and precautions, you can enjoy and  preserve the original beauty of your floor.

 Humidity

   Changes in humidity level can cause any wood floor to shrink or expand. In order to    minimize such movement, it is important to maintain the humidity level in your home    between 40% and 50%, through the use of appropriate humidity and ventilation    systems.

 Liquids and spills

   All liquids and spills should be wiped off as soon as possible in order to prevent any    possible damage. You may consider using area rugs to protect susceptible areas    (around kitchen sink, at entrance for wet footwear, etc.).

 Protection

   Abrasive dirt such as sand, street dirt and cat litter can damage any hardwood floor.    Protect your floor by using entrance mats and area rugs. Regular cleaning or    vacuuming of these rugs will prevent accumulation of dirt. Felt protectors under the    legs of all pieces of furniture will prevent damage caused by scratching.

 Sunlight

   Normal exposure to sunlight will cause slight color changes in any hardwood floor.    Area rugs, which block out light, should therefore be shifted regularly.

 Care products

   For best results, we recommend the use of specially formulated wood care and    maintenance products.
 
 Installation

   Before installing hardwood floors, subfloors should be carefully treated and/or    prepared, in order to prevent moisture-related problems and other problems
   associated  with construction defects or sub-par installation conditions. Floors
   should be installed according to widely recognized industry standards and practices.

 Maintenace

  • Never use a damped mop or wet cloth to clean your hardwood flooring. Water
    can seriously damage any kind of wood.

  • Never use wax on your polyurethane prefinished hardwood flooring.

  • Never allow direct contact between the legs of pieces of furniture and the flooring. Use felt protectors under the legs in order to prevent scratches.

  • Use a dry mop or vacuum cleaner frequently to eliminate solid particales which might scratch your hardwood flooring.

  • Please remember that water, sand, salt and dust are not compatible with hardwood flooring.

  • Without losing time, absorb water or liquid spills with a dry cloth.

  • If there is a door leading outside where you have installed hardwood flooring,
    use a door mat to catch the dirt and absorb the humidity. Never use a rubber mat, with a styrofoam or plastic backing. Some styrofoam may damage your floor, therefore they are not recommended on hardwood flooring.

    Glossary

    Acrylic Impregnated

    With acrylic impregnated hardwood flooring, the 1/16" hardwood veneer on the top of the floor has been injected (impregnated) with a plastic acrylic solution under very high pressure and heat. This specially treated acrylic resin makes the floor up to 300% harder and more indent-resistant than
    natural wood. The engineered construction also reduces the risk of expansion and buckling.

    Bevel

    Modern hardwood flooring is available in many different edge styles, from square edge to micro-bevelled, to deeply grooved edges.

    Square Edge - no Bevel - The edges of all boards meet squarely creating a uniform, smooth
    surface that blends the floor together from board to board. The look is contemporary and formal,
    and there are no grooves to catch dust. The square edge can cost 5 - 10% more, but it gives a smoother appearance and square edge floors are easier to refinish. The square edge is not recommended over uneven floors.

    Micro-Bevel - The micro-bevel is meant to help hide minor irregularities, such as uneven plank heights.

    Heavy or Hand-Bevel - These floors also hide floor irregularities, and have a very distinctive
    deep groove in them. The beveled edge planks lend themselves to an informal and country decor.
    The hand-beveled planks have a rustic, hand-hewn look.


    Caramelized or Carbonized Bamboo

    Bamboo flooring is available in Natural or Caramelized.

    Natural is a light blond color similar to maple, and Caramelized is a dark amber color similar to
    young teak. This darker color is not a stain, but a process of pressure heating the fiber at the
    factory, which darkens the sugar compounds in the fiber.


    Engineered Flooring (also called Laminated Flooring, Engineered-Wood Flooring)

    Engineered Wood Flooring is wood flooring made from two or more laminations (layers) of wood glued together in a sandwich. The surface is real, resandable wood -- not to be confused with plastic photo laminates.


    Floating Wood Floors

    What makes floating hardwood floors different from traditional hardwood flooring is that such floors aren't glued or nailed to the wood subfloor or concrete slab. The planks are attached to each other,
    and sit on top of the subfloor or sound barrier.


    The floor is installed with a small expansion gap at all edges, to allow for some natural expansion and contraction due to the seasons. The expansion gaps are never seen, they are covered by molding or shoe trim, and door thresholds .

    Glue-down

    In a glue-down application, hardwood flooring is adhered to the floor using a special type of
    adhesive - a chemical-drying compound.


    Some types of hardwood flooring may be adhered directly to:

  • Concrete
  • Sound Barriers
  • Plywood Subfloor
  • Radiant Heating

    The advantages of a glue-down application are:
      
  • No need to build a plywood subfloor, saving time and material
  • No subfloor means less height build-up, so less height differences between hardwood and non-hardwood flooring
  • A very solid floor with little to no movement

    Glue-down application requires a skilled installer and meticulous site preparation.

    The strength of your floor depends on the quality of the glue used. AllHardwoodFloor only uses proven, quality adhesives to ensure the bond remains strong into the future.


    Hardness

    When choosing your hardwood flooring it is essential to take into account not only its appearance
    but the hardness as well. It is worth choosing a harder wood species rather than a softer one for
    areas where hard wear is expected: children playing, pets, stiletto heels, a busy entrance hall.

    In the table below, the hardness of the different wood species are compared to oak whose
    reference value is 100.


    Relative Hardness of Hardwood Flooring Species
    Pine42
    Birch67
    Birch Baroque 67
    Maple (European)82
    Cherry85
    Walnut90
    Beech95
    Red Oak 97
    Oak100
    Rose Gum103
    Ash Baroque 105
    Ash105
    Beech Baroque118
    Beech Antique 118

    Maple (Canadian)

    123
    Jarrah131
    Merbau144
    Kempass154
    Santos Mahogany 163
    Brazilian Cherry (Jatoba)175


    Horizontal or Flat Grain, Vertical Grain (Bamboo)

    Bamboo flooring is available in Horizontal (Flat) Grain and Vertical Grain.

    Horizontal or Flat grain flooring is laid-up with 3 layers of flattened bamboo slats adhered together. When you look at the floor from above you can see the bamboo nodes.

    Vertical grain flooring is comprised of stalks that are adhered together vertically. You see a smaller portion of each stalk, and the nodes are less noticeable.


    Engineered Flooring (also called Laminated Flooring, Engineered-Wood Flooring)

    Engineered Wood Flooring is wood flooring made from two or more laminations (layers) of wood glued together in a sandwich. The surface is real, resandable wood -- not to be confused with plastic photo laminates.


    Plain Sawn vs. Quarter Sawn

    The grain that shows on the surface of your hardwood floor will appear different, dependingon how
    the wood was cut.


    Plain sawn (or flat-sawn) lumber has the growth rings of the tree parallel to the board's broad face. Plain sawn wood highlights the grain, loops and growth swirls of the wood.

    Quarter sawn has the growth rings of the tree approximately perpendicular to the board's surface. Quarter sawn wood has the straightest grain, and is used for our premium floors to add a sleek, streamlined look to any room.

    Rift Sawn lumber is cut at a 30-degree or greater angle to the growth rings. This produces narrow boards with accentuated vertical or "straight" grain patterns.

    How Quarter-Sawn Wood is Milled

    First, the log is cut into quarters. Then, the quarter is flipped ninety degress back and forth to saw
    off a plane of wood. This process does not produce any more waste than plain sawing, but it does require some extra time to flip the quarters back and forth. This milling process produces a specialty wood flooring cut called Rift and Quarter Sawn.


    The benefits to this cut of wood are straighter grain that is up to 50% more stable than plain sawn flooring, and a superior looking product featuring less variation, longer lengths, and medullary rays.

    Plank Style

    Engineered flooring may be available in different plank styles.

    3 Strip
    The entire board consists of three parallel strips of the same width. This style is usually the
    least expensive, and gives a busy patterned appearance that can disguise the seams where three
    strips end together.

    2 Strip
    The 2-strip Long Plank consists of 2 parallel strips, with joints. The strips are longer and larger, but there are still seams with two strips ending together.


    1 Strip
    The 1-strip consists of a single strip along the whole length of the board. This style may be available
    in different widths. This style is a bit more cost, but the single strip boards are the only style that truly give the effect of traditional hardwood flooring.



    Prefinished

    Prefinished floors arrive for installation with a durable finish already applied to the surface. Because there's no need for finish application and drying time, the floors are fast to install.

    Quarter Sawn vs. Plain Sawn

    The grain that shows on the surface of your hardwood floor will appear different, dependingon how
    the wood was cut.


    Plain sawn (or flat-sawn) lumber has the growth rings of the tree parallel to the board's broad face. Plain sawn wood highlights the grain, loops and growth swirls of the wood.

    Quarter sawn has the growth rings of the tree approximately perpendicular to the board's surface. Quarter sawn wood has the straightest grain, and is used for our premium floors to add a sleek, streamlined look to any room.

    Radiant Heated Floors (& Recommended Flooring)

    For many builders, the reluctance to install hardwood floors over radiant heat stemmed from
    problems associated with the original technology introduced more than 40 years ago. Back then,
    floors were heated excessively to compensate for poor building insulation. Those high temperatures exaggerated expansion and contraction in hardwood flooring. Today, modern insulation and building techniques allow a radiant floor to stay cooler than the floor of the average sunroom.


    Many of the new engineered floors available today are designed for radiant heated floor installation.

    Recommended flooring:
  • Premium site-finished long-length wood
  • Engineered Floating
  • Engineered Glue-down
  • Bamboo (engineered)
  • Cork Floors


    Rift Sawn

    Rift Sawn lumber is cut at a 30-degree or greater angle to the growth rings. This produces narrow boards with accentuated vertical or "straight" grain patterns.

    Site-Finished

    Site-finished hardwood floors are installed, and then stained and finished on-site. Site-finishing
    gives a traditional, flowing, and unbroken finished appearance.



    Vertical or Horizontal Grain, Flat Grain (Bamboo)

    Bamboo flooring is available in Horizontal (Flat) Grain and Vertical Grain.

    Horizontal or Flat grain flooring is laid-up with 3 layers of flattened bamboo slats adhered together. When you look at the floor from above you can see the bamboo nodes.

    Vertical grain flooring is comprised of stalks that are adhered together vertically. You see a smaller portion of each stalk, and the nodes are less noticeable.

     
    • Helpfull tips :

      There is just a wealth of subtle information required for all that is involved with either installing or sanding finishing a hardwood floor. Trowelling of filler and finishes for example. ( with the exception of Laquer sanding sealer) Can enhance the actual look of how flat or one dimentional) Trowelling of finish is an old timers tool , let me explain. When you have a common sawn or plain sawn floor the soft grain will scallop away easily. One polisher and sanding screen is usually the reason . By trowelling conversion varnish or moisture cured urethane you can actually fill the soft grain . The look is way better. In addition the process of trowelling finish on a Hardwood Floor also cut's off any raising grain fibres. And is an effiect way to clean up the surface of the Hard Wood Floor This process is not available for Water bourne finishes. however does work with polyurethane. AllHardwoodFloor Ltd. 604 603 7317

      Recoating your hardwood floors every few years is highly recommended. If you
      do this before the finish has a chance to wear through, it will extend the
      life of your floor and eliminate the need for re-sanding

      Troweling of filler and finish

      is an ancient art and is the standard of all high quality
      finishing. Troweling cuts off raised grain,it cleans, it fills divots,
      cracks and voids with finish, It fills scalloped soft grain with finish
      allowing the afterwards mopped coats to sit on top and give the floor a much
      flatter appeal, Way better! Why go to a company who only uses laquer sanding
      sealer and poly urethane which goes completely amber or yellow after only a
      few years reducing the contrast to a sea of marmalade

       ALL the Best Hardwood professionals Agree & AHF ltd. Agrees
       ALLHARDWOODFLOOR LTD uses the industries best looking and
      performing Glitsa(tm) Swedish finish.
      Put our brand on your Project

    Vancouver BC Hardwood Floor Refinishing,Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Flooring,Refinishing,Restoration,Repairs,Swedish Finish,AllHardwoodFloor ltd.BC Canada
    Main page

Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada


Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada

Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada

Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada

Vancouver BC Hardwood Floor Installation,Vancouver Hardwood Floors Sanding,Vancouver Hardwood Floor Refinishing Restoration Repairs Swedish Finish AllHardwoodFloors BC Canada



 

Vancouver BC Gym Gymnasium Refinishing/Vancouver BC Gym Gymnasium Refinishing.htm

Vancouver Hardwood Floors Refinishing Sanding Installation

Vancouver Hardwood Floors Sanding/Vancouver Hardwood Floors Sanding.htm

Fir Hardwood Floor Refinishing/Fir Hardwood Floor Refinishing.htm

All-Hardwood-Floor-Refinishing-Vancouver-BC/all-hardwood-floor-refinishing-vancouver-bc.htm